Page 99 - HIGHWAY ENGINEERING LABORATORY_FLIP BUILDER

Rate of flow; (9.15 ± 9.30) :

Rof = (volume (veh) x 60):15
=

Hourly volume :

= ( Total Rate of Flow):4
=

Average Daily Traffic (ADT):

=l volume (veh)/ 60
= Tota

DISCUSSION : * Interpret and comment the results obtained

a. Count the number of vehicles passing a specific reference point on a
road section within a specified period of time. For each 15 minutes that
had been conducted with the number of vehicles taken, result for peak
b. hour for the road can be taken.

c Throughout the observation, find the highest and lowest vehicle volume
. and make a comparison.

Flow rate of vehicles per hour was calculated to estimate the peak hour factor
(PHF) which are presents the ratio of total hourly volume to the maximum flow rate
within 1 hour. Average vehicles volume per hour was calculated in order to
estimate the average daily traffic (ADT)to measure present demand of traffic flow

per hour and per day.

CONCLUSION
a. Give your conclusion from this experimental and explain the result you get.

REFERENCES: Give at least 5 references you refer

Higway Engineering Laboratory page 84